WE ONLY DO A PROPER JOB
We have our own in-house body shop and full-time staff to run it. It’s exclusively for classic car restoration, we don’t do blow-overs or knock dents out of Taxi’s. We just restore classic cars to a very high standard. We always remove all the windows, doors, bumpers etc and use high quality paints and materials.
The main problem with all of these 30 odd year old vehicles is rust. There are 2 main types that affect the longevity of any paint job: There is real bad stuff that perforates the metal leaving holes in the painted surface. The only way to remove it is to cut it out and weld in fresh steel. Great care must be taken to not store up more problems for later and a skilled welder will use a butt welding process that leaves the finished surface as smooth as possible, minimising the use of filler to finish off the surface.
And the (apparently) not so bad stuff that sits on top of the metal and bubbles up through the surface. This is the rust that keeps coming back. Body-shops try sanding it off, grinding through it, painting chemicals over it or just hoping it will go away. It rarely does no matter how hard one tries. We have recently invested in a brand new media blasting machine from the market leaders, Hodge-Clemco. Its a full-size proper piece of kit powered by a the kind of compressor used on a road drill. This machine uses a special grit to remove everything from the surface right down to naked steel. Then we immediately apply an etch coating before surface oxidation takes place.
We can sate that it removed 99% of the surface rust and most of the rust from folded seams. Careful attention to these areas during the prep stage consolidates this effort and helps to hold it off in the future.
- Complex Welding
- Proper Blasting
- All Jig Work
- Colour Matching